Companies equipped with the network of research and development centers, manufacturing, laboratory, manufacturing lines, sales training, sales and installation service and We can also undertake various kinds of processing business such as embroidery thread, knitting yarn, zipper, luggage lines etc according to clients’ requirement. Therefore, our team designed DT9808 CNC composite twisting machine, a textile twisting machine, based on DT98 series thread making machine, using one-step twisting process.
Owning CNC forming, Japan Mitsubishi frequency conversion control, pulling capstan roller, 1kg--1.5kg roll capacity without knot, imported high speed steel containing oil, high speed and is easy to operate, with high quality of man-made filament.
Applicable of chemical filament yarn twisting: sewing thread, embroidery thread, bags yarn, zipper yarn, knitting yarns etc...
Ply count range: 50D—1000D
FAQ
How to check my order at last?
We warmly welcome you to visit our company in Hangzhou, Zhejiang province, China, for checking your machines. If you don’t come here, we can also take photos and videos for your conformation.
Can we send sample for customizing the machine?
No problem, we can send you samples, and our engineer will recommend and customize the machine according to your product and other demand.
Can we go to your factory discussing more detail and checking the quality of the machine?
Yes, no problem, welcome to our factory and we will do our best to help you.
Spindle arrangement |
2×1 |
3×1 |
Supply spindle NO. (1section) |
36 |
36 |
Ring spindle NO. (1section) |
18 |
12 |
Supply spindle NO. (10section) |
360 |
360 |
Ring spindle NO. (10section) |
180 |
120 |
Main Technical Date:
Twist range |
120 to 1250t/m, 3 to 31t/inch |
Twist direction |
S or Z changeable |
Assemble ends |
2-3 |
Roller diameter |
49mm |
Ring |
Φ110mm |
Max.winding height |
330mm |
Spindle driving |
Spindle belt drive |
Start mode |
Stepless speed controlled by inverter |
Take-up spindle gauge |
2×1 162mm 3×1 240mm |
Spindle speed |
600rpm |
Take-up bobbin capacity |
2×1 1.1kg 3×1 1.1kg or 1.5kg |
Max.installed power |
11KW |
Overall Size |
L×W×H=17.30M×1.40M×1.90M L×W×H=21.70M×1.40M×1.90M |
Textile industry related
Thermal setting can change the crystal structure of polyester, nylon and other synthetic fibers, and the crystalline structure of polyester fiber before and after heat setting. The change of fiber microstructure will inevitably change the dyeing performance of fiber. The normal preheating and setting can reduce the color yield of the fiber.
If the heat setting process is not properly controlled, the following dyeing diseases will occur: if there is a temperature difference between the left, middle and right in the heating area of the heat setting machine, the color difference between the left, the middle and the right will be larger if the temperature set by the heat setting process is higher; if there is difference in the air volume between the upper and lower tuyeres in the heating zone of the heat setting machine, there will be a phenomenon of "positive and negative sides" in dyeing: if the moisture content of the fabric is relatively high If the fabric enters into the high temperature setting area due to the uneven liquid content, it is easy to appear the phenomenon of dyeing difference, color flower and "positive and negative surface": if the external force of the fabric in the heat setting process is not hooked, such as excessive transverse stretching and excessive longitudinal super absorption, it will cause longitudinal and transverse dyeing streaks.
http://www.dttwister.com/